2010 Dodge Pickup
Mileage
222,789
Service Date
5/20/2020
Services Performed
- CLEAN EGR PASSAGES
- EGR BACK PRESSURE SENSOR – Remove & Replace – In-Line6
- EGR BY-PASS PIPE – Remove & Replace – In-Line6
- -PULLED CODES P2509 ECM/PCM POWER INPUT SIGNAL INTERMITTENT P0471 EXHAUST PRESSURE SENSOR A CIRCUIT RANGE/PERFORMANCE -INSPECTED WIRING TO EXHAUST PRESSURE SENSOR (OK) -MONITORED LIVE DATA FOR THE EXHAUST GAS PRESSURE SENSOR WITH THE KEY ON AND ENGINE OFF AND COMPARED IT TO THE INLET AIR PRESSURE AND CHARGE AIR PRESSURE (SHOULD BE THE SAME WHILE VEHICLE IS RUNNING). THE EXHAUST PRESSURE SENSOR WAS READING 8.85PSI WHILE BOTH OF THE OTHERS WERE READING 14.5PSI -DISCONNECTED THE SENSOR AND THERE WAS NO CHANGE IN IT`S READINGS. -REMOVED THE EXHAUST GAS PRESSURE SENSOR TO INSPECT PASSAGEWAY AND IT IS BLOCKED WITH SOOT. *RECOMMEND REPLACEMENT OF THE EXHAUST PRESSURE SENSOR, EXHAUST PRESSURE SENSOR PIPE, AND CLEAN OUT CONNECTING PASSAGES. THEN HAVE TO CLEAR CODES AND TEST DRIVE VEHICLE ** CODE P2509 WAS MOST LIKELY CAUSED BY HAVING THE BATTERIES DIE. HAVE TO CLEAR THE CODE AND SEE IF IT RETURNS (STORED AS A HISTORY CODE)
FRANK H. gave our service a 5 star review on 5/21/2020
